Download Latest Beta  
Caution!!!  The download firmware provided here is a BETA version which has not been released to the general public.  Using this version can result in some features from the previous public releases not working or changed, so we highly recommend that you are familiar with emergency recovery process in case you lose functionality of your player.  By downloading and installing this firmware, you are accepting the liability of the performance of your TViX. 

This version can be downloaded directly from your TViX by going to the Setup>System page and using your remote, press 2 3 8 3 Function which will load the BETA in the firmware update option.

Download BETA V2.0.3A3           tvix_1100-2.0.3_A3.zip      Posted:  6/30/10  27,438KB

 

The major differences from last version (1.9.9) are supporting Web-Remote 2^nd version and native frame rate.

This revision also contains many changes including APE music, IMS weather improvement, etc.

 

The upgrade procedure takes less than a single minute. If the firmware upgrade fails, please do the SAFE-UPGRADE.

 

Release Notes for Rev 2.0.3A3 since Rev 1.9.9 (last official firmware).

 

[Multimedia Player/ System]

1. Supports the Web-Remote 2^nd version.

• Supports the automatic detection of iPhone, iPad, Android phone and notebook PC, and adjust the resolution accordingly.
• Supports the “Control” button which enables popping-up of same buttons as actual remote. So you can do anything with Web-Remote just like actual remote.
• Supports HDTV/ PHOTO main user interface.
• For changes and new usage please refer to ftp://ftp.dvico.com/Manual/TViX/etc/Web_Remote_Eng.pdf

2. Supports the APE/ CUE music file format.

• Supports the lossless APE music format.
• Supports the CUE playlist file as well.

3. Supports the “Native Frame Rate”.

• Supports original frame rate of each file. (60i, 50i, 24p, 25p, 50i, 50p, 60p)
• You can configure the behavior of each frame-rate.
• This mode is only available when screen resolution is 1080p50Hz or 1080p60Hz.
• The “native resolution”  (e.g. 480p24Hz 480p24Hz) is not supported at this moment
• To enable this Setup > AV > Video Auto Switch > Native framerate

4. Supports the enforcement of audio pass-thru.

• This option can be turned on at Setup > AV > Audio & Video > Force audio pass-thru
• If you turn on this option then you set “RAW” digital audio pass-thru mode, the actual raw digital audio format will be output regardless of EDID information of TV.
• This will enable raw digital bit-stream output when you connect TVIX like TVIX > HDMI port > TV > optical cable > AV receiver.
• Some TV cannot pass-thru Dolby Digital or DTS properly. Please check your TV first.

5. Supports the OSD on/off.

• You can turn off the OSD for using TVIX as commercial playback machine.

6. Supports the slow fast forward.

• After “pause”, press right button to enable 1/16x > 1/8x > 1/4x > 1/2 > 3/4x slow forward in turn.

7. Supports the subtitle text encoding regardless of menu language.

• You can select text encoding after popping-up subtitle window then “left” button (can see small triangular button on left side)
• You can also configure it at Setup > System > Language > Text encoding

8. Supports the subtitle “OFF” status.

• If you turn off the subtitle, then the status will be saved and be applied next time you boot-up.

9. Changes the default main user interface to brighter color combination.
10. Supports the 16:10 aspect ratio.
11. Supports the Polish and Portuguese menu language.
12. Fix the problem of some idx+sub subtitle.
13. Changes the Hebrew font for better looking of system menu.
     

[Network]

1. Improves IMS (Internet Media Service) functions quite a bit

• Rearranges overall icons and services.
• Improves “WEATHER” gadget. (Supports multi-national language and adds “favorite” location. So you can save your location for checking weather.)
• Pressing RIGHT button on You-Tube list will show the thumb-nail preview.
• Supports PLAY/PAUSE of You-Tube.
• Adds “Internet TV” service.
• You can download movie files on some service.

1. For example, go to IMS > Internet channel > HD net , then press “RIGHT” button on wanted movie clip.
2. Select “download” button, then the clip will be stored on /Movie folder.

 

2. Improves the network setup procedure

• Setup wizard will appear to ease the network setup
• Support the manual designation of hidden SSID. Click the “unknown” SSID at AP browser windows and input the name.
• Support both “OPEN” and “SHARED” network keys.
• Will memorize previous NETWORK KEY up to 4 APs (access points). You don’t have to re-input the NETWORK KEY during the setup procedure, if you done it once before.

 

3. Supports Ralink RT307x chipset Wi-Fi module

• Supports both WEP/ WPA configuration.
• Shows very good sustained performance (1080p streaming is O.K.)
• It will take about 30 seconds for initial setup of Ralink module.
• Most of the current 11n Wi-Fi dongles are RT307x based. Please let us know the USB VID/PID for adding your own RT307x based 11n Wi-Fi dongle.

 

 

 
 

HDMMX4 4x2 HDMI