Click here for MDP-120
standard VGA configuration (no DVI daughtercard)
Configuration #1 - HDTV
or PC Monitor with DVI inputs.
To connect to one display and toggle between the PC
desktop/full-screen HDTV, connect the loop-back cable between DVI
output of your video card and the MyHD DVI Daughter Card input.
Connect another DVI cable from the DVI Daughter Card output to your
HDTV or Monitor's DVI input.
Configuration #2 - HDTV
and PC Monitor in Separate Monitor Mode. Configuration #2 displays
to a computer monitor and HDTV both with DVI inputs. PC Monitor
can also be connected to the VGA but MDP-120's VGA and DVI outputs
cannot output full-screen HDTV simultaneously to two different
displays in. DVI daughter card also adds TOSLINK audio output
feature to the MDP-120.
When using the DVI
daughter card for HDTV output, "Enable Digital Flat Panel Mode
Output" must be checked in the VGA Setup mode of the MyHD Config
Panel as shown below.